EcoQuip EQ100m

[vc_row][vc_column][vc_empty_space][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”1096″ img_size=”medium” alignment=”center” css_animation=”top-to-bottom”][/vc_column][vc_column width=”1/2″][vc_column_text]Fully portable entry level unit

With its built-in hand truck, slide rails and convenient lifting eye, the patented EQ100m design is easy to move at the jobsite. The EQ100m can accommodate any abrasive heavier than water. It’s a tough worker, capable of handling any type of project, from cleaning to surface preparation.

  • Requires 165-375 cfm air compressor
  • Fits in the bed of most standard pickup trucks

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Features” tab_id=”1447257790255-260d1e75-1ebe”][vc_empty_space][vc_row_inner][vc_column_inner width=”1/2″][vc_single_image image=”1092″ img_size=”medium” alignment=”center” css_animation=”top-to-bottom”][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text]About Vapor Abrasive Blasting

  • Generates less dust – 92% less airborne dust than dry blasting
  • Optimizes air, water and media ratio – resulting in a fine mist with a blast that is powerful, but with less dust
  • Uses less water than traditional water-based wet blasting
  • Uses less media than wet blasting, so clean up is minimal* and you save on media costs

Built to take a beating

  • Designed for years of solid service
* Results may vary. If hazardous materials are being blasted, containment or clean-up may be required.

[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_empty_space][/vc_tta_section][vc_tta_section title=”Resources” tab_id=”1447257790321-1146ba90-8ea0″][vc_row_inner][vc_column_inner width=”1/3″][vc_column_text]


[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text]


[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text]

Other Resources

[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_empty_space][/vc_tta_section][vc_tta_section title=”Specifications” tab_id=”1447258447509-8fd0eb27-dc52″][vc_empty_space][vc_column_text]

EcoQuip EQ100M Vapor Abrasive Blast System
   Maximum Working Pressure
125 psi
   Operating Temperature
35° – 110° F
   Air Consumption
165 – 375 cfm
   Blast Hose Size
1 in. ID
   Abrasive Capacity
100 – 250 lb
   Dry Weight
360 lb
   Wet Weight
900 lb
   Pressure Pot Volume
2.2 cubic feet
   Water Tank Volume
10 gallon
   Compressor Size and Hose Length (Minimum ID)
   185–600 cfm compressor and less than 100 ft hose length
1.5 in.
   Over 600 cfm or greater then 100 ft. hose length
2 in.
   Sound Data*
   Sound Pressure Level
133 dB(A)
   Sound Power Level
139 dB(A)
   Instantaneous Sound Pressure Level
131 dB(C)
*All readings were taken at the maximum system blast pressure 125 psi (8.6 bar, 0.86 MPa) from the operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614–2.