EcoQuip EQ300s

[vc_row][vc_column width=”1/2″][vc_single_image image=”1110″ img_size=”medium” alignment=”center” css_animation=”top-to-bottom”][/vc_column][vc_column width=”1/2″][vc_column_text]he EQ300s is a standalone  unit designed to tackle most typical blasting projects. The EQ300s is built according to tough standards and can be stacked safely in a warehouse.

  • Requires 185-375 cfm air compressor
  • Fits inside a six-foot truck bed for easy transport
  • Stacks easily to save space

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Features” tab_id=”1447258916728-32fb9d0a-4452″][vc_empty_space][vc_single_image image=”1114″ img_size=”medium” alignment=”center” css_animation=”top-to-bottom”][vc_row_inner][vc_column_inner][vc_column_text]Vapor Abrasive Blasting: A cleaner, easier path to profitable results

  • Generates less dust – 92 percent less airborne dust than dry blasting
  • Uses less water than traditional water-based wet blasting
  • Optimizes air, water and media ratio – resulting in a fine mist with a blast that is powerful, but with less dust
  • Uses less media than wet blasting, so clean up is minimal* and you save on media costs

Built to take a beating

  • EcoQuip systems are built with heavy-duty stainless steel crash frames to withstand the toughest conditions
  • 5x safety rated frame
  • Designed for years of solid service

* Results may vary. If hazardous materials are being blasted, containment or clean-up may be required.[/vc_column_text][vc_empty_space][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Resources” tab_id=”1447258916787-7d2657c9-d0cc”][vc_row_inner][vc_column_inner width=”1/3″][vc_column_text]


[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text]


[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text]

Other Resources

[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_empty_space][/vc_tta_section][vc_tta_section title=”Specifications” tab_id=”1447259270651-643319ff-0123″][vc_empty_space][vc_column_text]

   Maximum Working Pressure
125 psi
   Operating Temperature
35° – 110° F
   Air Consumption
165 – 375 cfm
   Blast Hose Size
1 in. ID
   Abrasive Capacity
400 – 500 lb
   Dry Weight
1100 lb
   Wet Weight
2900 lb
   Pressure Pot Volume
6.5 cubic feet
   Water Tank Volume
115 gallon
   Compressor Size and Hose Length (Minimum ID)
   185–600 cfm compressor and less than 100 ft hose length
1.5 in.
   Over 600 cfm or greater then 100 ft. hose length
2 in.
Sound Data: All readings were taken at the maximum system blast pressure 125 psi (8.6 bar, 0.86 MPa) from the operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614–2.
   Sound Pressure Level
133 dB(A)
   Sound Power Level
139 dB(A)
   Instantaneous Sound Pressure Level
131 dB(C)