Variety of Products

Full range of industry equipments with high quality and certified standard

All Products

Electrostatic Spray

[vc_row][vc_column][vc_empty_space height=”25px”][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]Pro Xp Electrostatic Spray Guns
We took our trademark, high performing electrostatic spray guns and made them better. They are smaller, lighter and designed to maximize your profits. Available in 40, 60 and 85 kV, the Pro Xp electrostatic spray gun also has a Round Spray option for when you need a bell-shaped pattern and a High Conductivity version for when you have low resistivity material.[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_single_image image=”1185″ img_size=”medium” alignment=”center” css_animation=”top-to-bottom”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

Pro Xp Air Spray: For low pressure spraying with an isolation system including the WB100.

Pro Xp Air-Assist: For high pressure spraying with an isolation system including the WB3000. Delivers a fine finish with an AEF or AEM tip.

Pro Xp MR: Low pressure spraying with a fine finish spray tip. Delivers fine atomized particles required for mold release applications. Connects to an isolation system, including the WB100 and sprays with an AEM or AEF spray tip.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Features” tab_id=”1447325955542-e2ced556-6d59″][vc_empty_space][vc_column_text]

  • Superior atomization for a high quality finish
  • Internal power supply allows for quick installation and easy service
  • Lightweight and compact design increases operator comfort
  • Smart display for increased operator feedback
  • Rugged design outlasts the competition
  • Easy installation – uses only air to generate electrostatic power

[/vc_column_text][vc_empty_space][/vc_tta_section][vc_tta_section title=”Resources” tab_id=”1447325955611-4fba2ea6-8543″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]

Manuals

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text]

Literature

[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_empty_space][/vc_tta_section][vc_tta_section title=”Specifications” tab_id=”1447326280964-f4541da6-648c”][vc_empty_space][vc_column_text]

Electrostatic Air Spray Waterborne Guns
Maximum Working Fluid Pressure
100 psi
Maximum Working Air Pressure
100 psi
Minimum Air Pressure at Gun Inlet
45 psi
Maximum Fluid Operating Temperature
120°F
Short Circuit Current Output
125 microamperes
Voltage Output Energy
0.35 J with fluid hose 24M733 installed. L60T17 and L60T18: 60 kV. L60M17, L60M18, and L60M19: 30–60 kV
Sound Power (measured per ISO Standard 9216)
at 40 psi: 90.4 dB(A) at 100 psi: 105.4 dB(A)
Sound Pressure (measured 1 m from gun)
at 40 psi: 87.0 dB(A) at 100 psi: 99.0 dB(A)
Air Inlet Fitting
1/4 npsm(m) left-hand thread
Fluid Inlet Fitting
Custom inlet for Graco waterborne fluid hose.
Isolation Enclosure Air Inlet Fitting
1/4 npt
Isolation Enclosure Fluid Inlet Fitting
3/8 in. OD tube fitting
Wetted Parts
Gun: Stainless Steel, PEEK, UHMWPE, Fluoroelastomer, Acetal, Nylon, Polyethylene, Tungsten Wire. Waterborne Fluid Hose: PTFE. Suction Tube: Polyethylene, Stainless Steel. Triton Pump: See manual 309303.

[/vc_column_text][vc_empty_space][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row]