XP Plural Component Airless Sprayers

[vc_row][vc_column][vc_column_text]

XP35 Plural-Component Sprayer 

[/vc_column_text][vc_column_text]

Two-component spraying made easy and affordable

For low pressure protective coatings applications

[/vc_column_text][vc_column_text]A smart alternative to hand mixing

Graco XP Plural-Component Sprayers are designed to pump, mix and atomize high-viscosity, high-solids coatings with superior results. When you upgrade from hand mixing, you’ll find that the XP provides excellent return on investment, by reducing material waste and by using less clean-up solvent.

Optimized for lower-pressure airless spray applications, the Graco XP35 has similar flow capability as the XP70, but a smaller NXT 3400 air motor. The XP35 is an ideal replacement for Graco Bulldog Hydra-Cat™ systems.

Try the ROI calculator in the Resources tab and see how much you can save.[/vc_column_text][vc_single_image image=”956″ img_size=”medium” alignment=”center”][vc_tta_tabs][vc_tta_section title=”Features” tab_id=”1447228154552-fe60c922-fe97″][vc_column_text]

Switch from hand-mixing and see the benefits

  • Reduced material waste
  • No more throwing away unused mixed material at the end of the day
  • Save money by using less clean-up solvent
  • Consistent material quality – no more guesswork or human error in measuring materials
  • Easy to operate – minimal training required
  • Reduced maintenance costs
  • Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Resources” tab_id=”1447228154645-d8bc8fac-ff88″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]

Manuals

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text]

Literature

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Specifications” tab_id=”1447228156280-4f085c00-9dbe”][vc_column_text]

Xtreme Lowers
Maximum operating temperature
180°F
Wetted parts
Carbon Steel; Alloy Steel; 304, 440 and 17-4 PH Grades of Stainless Steel; Zinc and Nickel Plating; Ductile Iron; Tungsten Carbide; PTFE; Leather
Stroke length
4.75 in.
Maximum fluid working pressure
L036C0
7250 psi
L046C0
7250 psi
L054C0
7250 psi
L058C0
7250 psi
L072C0
7250 psi
L085C0, L085C1, L085C2, L085C3, L085C4
7250 psi
L090C0
7250 psi
L097C0
7250 psi
L115C0, L115C1, L115C2, L115C3, L115C4
7250 psi
L145C0, L145C1, L145C2, L145C3, L145C4, L14AC1
7400 psi
L145C8
4500 psi
L180C0, L180C1, L180C2, L180C3, L180C4, L180C7, L180C9, L18AC1
7400 psi
L220C0, L220C1, L220C2, L220C3, L220C4, L220C9, L22AC1
6000 psi
L250C0, L250C1, L250C2, L250C3, L250C4
5600 psi
L250C8
5600 psi
L290C0,L290C1, L290C2, L290C3, L290C4, L29AC1, 24N942
5600 psi
L22HC1, L22HC2, L25HC1, L25HC2, L29HC1, L29HC2
7250 psi
Nominal displacement per cycle
L036C0
36cc
L046C0
46cc
L054C0
54cc
L058C0
58cc
L072C0
72cc
L085C0, L085C1, L085C2, L085C3, L085C4
85cc
L090C0
90cc
L097C0
97cc
L115C0, L115C1, L115C2, L115C3, L115C4
115cc
L145C0, L145C1, L145C2, L145C3, L145C4, L148C8, L14AC1
145cc
L180C0, L180C1, L180C2, L180C3, L180C4, L180C7, L180C9,
185cc
L220C0, L220C1, L220C2, L220C3, L220C4, L220C9, L22AC1, L22HC1, L22HC2
220cc
L250C0, L250C1, L250C2, L250C3, L250C4, L25HC1, L25HC2
250cc
L290C0,L290C1, L290C2, L290C3, L290C4, L29AC1, 24N942, L29HC1, L29HC2
290cc
Effective Area
L036C0
0.2325 in.
L046C0
0.3100 in.
L054C0
0.349 in.
L058C0
0.3715 in.
L072C0
0.465 in.
L085C0, L085C1, L085C2, L085C3, L085C4
0.5542 in.
L090C0
0.581 in.
L097C0
0.620 in.
L115C0, L115C1, L115C2, L115C3, L115C4
0.7430 in.
L145C0, L145C1, L145C2, L145C3, L145C4, L145C8, L14AC1
0.9300 in.
L180C0, L180C1, L180C2, L180C3, L180C4, L180C7, L180C9,
1.1624 in.
L220C0, L220C1, L220C2, L220C3, L220C4, L220C9, L22AC1, L22HC1, L22HC2
1.395 in.
L250C0, L250C1, L250C2, L250C3, L250C4, L25HC1, L25HC2
1.620 in.
L290C0, L290C1, L290C2, L290C3, L290C4, L29AC1, 24N942, L29HC1, L29HC2
1.860 in.

[/vc_column_text][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

XP50 Plural-Component Sprayer 

[/vc_column_text][vc_column_text]

Two-component spraying made easy and affordable

For higher-volume protective coatings

[/vc_column_text][vc_column_text]A smart alternative to hand mixing

Graco XP Plural-Component Sprayers are designed to pump, mix and atomize high-viscosity, high-solids coatings with superior results. When you upgrade from hand mixing, you’ll find that the XP provides excellent return on investment, by reducing material waste and by using less clean-up solvent.

Engineered for more flow capacity, the Graco XP50 is great for applications where you want to spray with multiple guns or larger tip sizes. The XP50 provides more production, so you can get the job done faster.

Try the ROI calculator in the Resources tab and see how much you can save.[/vc_column_text][vc_single_image image=”966″ img_size=”full” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Features” tab_id=”1447228482749-0d3ab302-7a7f”][vc_column_text]

Switch from hand-mixing and see the benefits

XP50 protective coatings application 4
  • Reduced material waste
  • No more throwing away unused mixed material at the end of the day
  • Save money by using less clean-up solvent
  • Consistent material quality – no more guesswork or human error in measuring materials
  • Easy to operate – minimal training required
  • Reduced maintenance costs
  • Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Resources” tab_id=”1447228482994-f54f253a-1e69″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]

Manuals

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text]

Literature

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

XP70 Plural-Component Sprayer 

[/vc_column_text][vc_column_text]

Two-component spraying made easy and affordable

High-pressure performance for two-part high-solids coatings

[/vc_column_text][vc_column_text]A smart alternative to hand mixing

The Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high-viscosity, high-solids coatings with superior results. In addition, the XP70’s design allows you to gravity feed, which may eliminate the need for feed pumps, saving you money. When you upgrade from hand mixing, you’ll find that the XP70 provides excellent return on investment, by reducing material waste and by using less clean-up solvent.

Try the ROI calculator in the Resources tab and see how much you can save.[/vc_column_text][vc_single_image image=”970″ img_size=”full” alignment=”center”][vc_tta_tabs][vc_tta_section title=”Features” tab_id=”1447228613196-0da1ff8c-19e7″][vc_column_text]

Switch from hand-mixing and see the benefits

XP50 protective coatings application 4
  • Reduced material waste
  • No more throwing away unused mixed material at the end of the day
  • Save money by using less clean-up solvent
  • Consistent material quality – no more guesswork or human error in measuring materials
  • Easy to operate – minimal training required
  • Reduced maintenance costs
  • Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Resources” tab_id=”1447228613634-9f231e8a-0714″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]

Manuals

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text]

Literature

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row]