Variety of Products

Full range of industry equipments with high quality and certified standard

All Products

Pumping process & Equipment

[vc_row][vc_column][vc_column_text]

Husky 3300 Air-Operated Double Diaphragm Pumps 

[/vc_column_text][vc_column_text]

3 inch Positive Displacement Double Diaphragm Pump

AODD pumps with 3 inch (76.2 mm) connection available in aluminum, polypropylene and stainless steel

[/vc_column_text][vc_column_text]

The Husky 3300, 3 inch (76.2 mm), pneumatic double diaphragm pumps feature a four bolt joint design, which provides even sealing pressure for leak-free operation and a three-piece manifold for increased installation flexibility. Available in aluminum, polypropylene and stainless steel.

Process AODD Pump Selector Banner Ad

[/vc_column_text][vc_single_image image=”996″ img_size=”full” alignment=”center”][vc_video link=”https://www.youtube.com/watch?list=PLCF227F4A7802C5DA&v=r4Cjeqoe04k”][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Features” tab_id=”1447229480253-dde25bb8-f61b”][vc_column_text]

  • Expanded material offering to handle numerous applications
  • Flow rates up to 300 gpm (1,135 lpm)
  • Modular stall-resistant air valve design
  • Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections
  • Heavy-duty construction
  • Faster change over with spring loaded pilot valves

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Resources” tab_id=”1447229480353-b79064cd-9096″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]

Manuals

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text]

Literature

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Specifications” tab_id=”1447229482680-3dd21fdb-a31c”][vc_column_text]

Husky 3300 Air-Operated Diaphragm Pump
Maximum fluid working pressure
Aluminum or Stainless Steel with Aluminum Center Section
125 psi
Polypropylene or Stainless Steel with Polypropylene Center Section
100 psi
Air pressure operating range**
Aluminum or Stainless Steel with Aluminum Center Section
20-125 psi
Polypropylene or Stainless Steel with Polypropylene Center Section
20-100 psi
Air consumption
All pumps
90 scfm at 70 psi, 100 gpm
Maximum air consumption*
Aluminum or Stainless Steel with Aluminum Center Section
335 scfm
Polypropylene or Stainless Steel with Polypropylene Center Section
275 scfm
Maximum free-flow delivery*
Standard diaphragms
300 gpm at 125 psi
Standard diaphragms
280 gpm at 100 psi
Overmolded diaphragms
270 gpm at 125 psi
Overmolded diaphragms
260 gpm at 100 psi
Maximum Pump Speed*
Standard diaphragms
103 cpm at 125 psi
Standard diaphragms
97 cpm at 100 psi
Overmolded diaphragms
135 cpm at 125 psi
Overmolded diaphragms
130 cpm at 100 psi
Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables)*
Dry
16 ft.
Wet
31 ft.
Recommended cycle rate for continuous duty
35 – 50 cpm
Recommended cycle rate for circulation systems
20 cpm
Maximum size pumpable solids
1/2 in.
Fluid flow per cycle**
Standard diaphragms
2.9 gal
Overmolded diaphragms
2.0 gal
Ambient Temperature
Minimum ambient air temperature for operation and storage. NOTE: Exposure to extreme low temperatures may result in damage to plastic parts
32° F
Noise (dBa)***
Sound Power
99.1 at 50 psi and 50 cpm, 106.1 at 125 psi and full flow
Sound Pressure
91.5 at 50 psi and 50 cpm 98.2 at 125 psi and full flow
Inlet/Outlet Sizes
Fluid inlet – Polypropylene
3 in. ANSI/DIN flange
Fluid inlet – Aluminum
3 in.-8 npt or 3 in.-11 bspt with 3 in. ANSI/DIN flange
Fluid inlet – Stainless Steel
3 in.-8 npt or 3 in.-11 bspt
Air Inlet – all pumps
3/4 in. npt(f)
Wetted parts
All pumps
Materials chosen for seat, ball, and diaphragm options, plus the pump’s material of construction – aluminum, polypropylene, or stainless steel. Aluminum pumps also have carbon-coated steel
Non-wetted external parts
Polypropylene
stainless steel, polypropylene
Aluminum
aluminum, coated carbon steel
Stainless Steel
stainless steel, polypropylene or aluminum (as used in center section
Weight
Polypropylene
200 lb
Aluminum
150 lb
Stainless Steel
255 lb
Notes
* Maximum values with water as media at ambient temperature. Water level is approximately 3 feet above pump
** Startup pressures and displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type.
*** Sound power measured per ISO-9614-2. Sound pressure was tested 3.28 ft (1 m) from equipment.
Santoprene® is a registered trademark of the Monsanto Co.
Loctite® is a registered trademark of the Loctite Corporation

[/vc_column_text][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

Husky 15120 Air-Operated Double Diaphragm Pumps 

[/vc_column_text][vc_column_text]

1.5 inch Positive Displacement Double Diaphragm Pump

AODD pumps with 1-1/2 inch (38.1 mm) connection available in polypropylene and PVDF

[/vc_column_text][vc_column_text]

Our new Husky 15120 pneumatic double diaphragm pumps have a single piece polypropylene center section for increased reliability and chemical compatibility, plus a patented, high-reliability modular air valve that is online serviceable. Design improvements include the overmolded frame which provides improved reliability and helps to eliminate fluid leakage and an updated diaphragm design that increases flow with flow rates up to 120 gpm (454 lpm) – making it one of the most efficient pumps on the market.

Process AODD Pump Selector Banner Ad

[/vc_column_text][vc_single_image image=”997″ img_size=”full” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Features” tab_id=”1447229649830-49549795-f432″][vc_column_text]

  • 1-1/2 in (38.1 mm) ANSI center and end-porting options available
  • High flow – 120 gpm (454 lpm) in a compact, portable size
  • Fluid pressure to 125 psi (8.6 bar, 0.86 MPa)
  • Lube-free operation
  • Available in polypropylene and PVDF

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Resources” tab_id=”1447229650031-26beb691-22f6″][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]

Manuals

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text]

Literature

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_tta_section][vc_tta_section title=”Specifications” tab_id=”1447229651969-20d9a0e1-afb7″][vc_column_text]

Husky 15120 Air-Operated Diaphragm Pump
Maximum fluid working pressure
125 psi
Air pressure operating range
20 to 125 psi
Air inlet size
1/2 in. (npt(f)
Air exhaust size
1 in.
Fluid inlet and outlet size (ANSI/DIN flange)
1.5 in
Maximum suction lift (reduced if balls don’t seat well due to damaged balls or seats, lightweight balls, or extreme speed of cycling)
Wet: 31 ft, Dry: 16 ft
Maximum size pumpable solids
1/4 in.
Minimum ambient air temperature for operation and storage. NOTE: Exposure to extreme low temperatures may result in damage to plastic parts.
32° F
Air Consumption
43 scfm at 70 psi, 60 gpm
Maximum Air Consumption
85 scfm
Noise (dBa): Sound power measured per ISO-9614–2. Sound pressure was tested 3.28 ft (1 m) from equipment.
Sound Power
90.9 at 70 psi and 50 cpm, 102.1 at 100 psi and full flow
Sound Pressure
83.6 at 70 psi and 50 cpm, 95.7 at 100 psi and full flow
Fluid flow per cycle
1–piece bolt-through diaphragms
0.63 gallons
2–piece bolt-through diaphragms
0.66 gallons
Overmolded diaphragms
0.59 gallons
Maximum free-flow delivery
1–piece bolt-through diaphragms
122 gpm
2–piece bolt-through diaphragms
120 gpm
Overmolded diaphragms
115 gpm
Maximum pump speed
1–piece bolt-through diaphragms
192 cycles per minute
2–piece bolt-through diaphragms
183 cycles per minute
Overmolded diaphragms
195 cycles per minute
Weight
Polypropylene
57 lb
PVDF
74 lb
Wetted Parts
Wetted parts include material(s) chosen for seat, ball, and diaphragm options, plus the pump’s material of construction: Polypropylene or PVDF
Non-wetted external parts
stainless steel, polypropylene

[/vc_column_text][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row]